Smoke generators KON UDG-1000, UDG-370, etc.

The equipment is not supplied. Ask for an analog selection.

Automated smoke generator model UDG 1000 for smokehouse installations with control of temperature and rate of combustion of wood raw materials. The UDG 1000 is equipped with a smoke purification and fire extinguishing system, and the remote control is attached to a smoke generator and a thermal chamber (depending on the camera configuration). UDG 1000 provides a KON centered smoke-air mixture in working volumes of up to 20 cubic meters.

The manufactured UDG-370 smoke generators have a fully sealed housing. The formation of a smoke-air mixture in a smoke generator is carried out by flameless burning of sawdust (wood chips).
This process occurs due to the smooth feeding of sawdust onto the smoldering plate. The sawdust feed rate is adjusted depending on the rate of smoldering, i.e. the amount of mixture formation per unit time. The sawdust is ignited in advance (4 minutes before the start of smoking) using an electric heater. With the start of smoking, an electric fan is turned on to supply air to the smoldering zone and to the boost zone. Further, smoldering occurs without the participation of a heating element, which significantly increases its service life. With the help of valves, the air supply is adjusted, which means that the amount of smoke generated per unit of time.